AVer ExpressGo User Manual
Page 92
86
6.
In (5) Abnormal Event to set the condition of the event for system to alarm.
System Reboot: when the NVR system reboot without abnormal condition, the system
will send out the alarm message.
Abnormal Reboot: when the NVR system reboot in irregular condition, the system will
send out the alarm message.
Recording is switched off: when the recording has been stopped, the system will send
out the alarm message.
Network is switched off: when the network connection of NVR system is lost, the
system will send out the alarm message.
Hard Disk failed: when the hard disk
doesn’t work normally, the system will send out the
alarm message.
S.M.A.R.T.: select the risk level (High or Low) that base on the D
VR system’s S.M.A.R.T.
mechanism to detect the hard disk’s status and the system will send out the alarm
message when the status has matched the selected risk level.
7.
In (6) Alarm Message to active with external alarm message by your own program. For the detail
configuration, please contact the local reseller.