AVer EXR6004-WiFi - Manual (Page 50)

44
- Relay Output
Set to enable/disable the relay operation when the
alarm is activated and to extend additional time in
second before it stops the relay operation.
1. Beside the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the
available relay list and in the ON column, set to
enable/disable the relay operation when the alarm is
activated.
3. In the Retrieve time check box, you may
enable/disable to extend the relay operation time
and set the duration in second.
4. Click OK to exit and accept the setting and Cancel
to exit without saving the setting.
- Play Warning Sound
Play alarm sound.
- Send E-mail
Send an electronic text message. Beside the Send Email check box, click Detail.
In the E-mail Setting dialog box, click OK to exit and save the setting and Cancel to exit without
saving the setting.
(1)
(2)
(1) Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication check box and enter ID and Password.
(2) Mail
Fill the mailing information.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).
Subject: Enter the message title.
Message: Type the message.