AVer EXR6004-WiFi - Manual (Page 33)

27
3.3 Camera Setup
The DVR system supports 4 Wireless IP camera connections.
Click Default will back to the factory default value.
3.3.1 To Setup the Wireless IP Camera
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as IP Camera.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still
record the video and preview it in playback mode.
- Enable Audio
Enable/disable audio of the camera.
- Name
Change the camera name
- Description
Add a short comment
(5) IP Camera Information
To setup IP camera and display current IP camera information.
Use IP Camera Motion: Mark to enable the motion detected function if the IP camera has supported.
Once this function has enabled, the motion detection will based on the IP camera has supported.
IP Setting: Click IP setting to view IP camera ’s detail information. User can view current connected
wireless IP camera information such as Protocol, Model, Video Format, Channel, and IP Camera
Site(IP address of IP camera). If wireless IP camera has enabled the authentication, user can mark