AVer E1008H - Manual (Page 89)

80
(the setup time period is 1~60 seconds). After is done, click Save to keep the settings.
Setup Analog Camera PTZ Function
User can enable PTZ function if the Analog camera has supported.
1. In Camera Management dialog box , click Setup tab
2. Then, select Camera # > PTZ tab.
3. In PTZ setup page, mark Use PTZ to enable PTZ function.
4. Connection Settings: select the following selections and click Save to apply the settings.
 COMPort: The connecting port is fixed and can ’t be changed. The default is RS485
port.
 ID: Assign an ID number for the PTZ camera.
 Baud Rate: Please refer to the user
’s manual of the PTZ camera to make sure the
baud rate.
 Protocol: Please refer to the user ’s manual of the PTZ camera to make sure what
protocol is using.