AVer E1008H - Manual (Page 78)

69
 Motion Detection
In the motion detection page, the frame will blink when the motion detected has reached the
percentage threshold setting. This feature can be utilized to trigger a response in Event setting.
1. Enable the region check box (Region 1, Region 2, Region 3) to create a motion detection
frame.
2. Move and adjust the frame to the area you want to detect the motion.
3. Adjust the sensitivity and percentage. Sensitivity detects the motion on the screen and
assesses the changes in pixel thru percentage. The motion detection will activate when the
Monitor level reaches the defined percentage.
4. After completing the setting, click Apply to save the setting and Cancel to keep the old
setting.