AVer E1008H - Manual (Page 51)

42
- GATEWAY: A network device act as a passageway to internet. Enter the network
gateway IP address
- DNS: Domain Name Server translates domain names (such as www.abb.com.tw)
to IP addresses. Enter the IP address of DNS if it is available.
 DHCP: Uses DHCP server assigning NVR/DVR server an IP address.
 PPPOE: Point-to-Point Protocol over Ethernet is a network protocol for encapsulating
PPP frames in Ethernet frames. It is used mainly with ADSL services. If your network is
using ADSL service connecting to internet, and then, select PPPOE mode. Enter User
ID and Password that is given by your ISP for PPPOE connecting authority.
4. Set as default gateway: The NVR/DVR system supports dual LANs, but only one LAN
port can be set as default gateway.
5. Setup the DDNS. To use this feature, register your own domain name server first. Only the
LAN port is set as default gateway can be set DDNS function.
 Domain Name: The user has applied on DDNS website.
 ID: The account ID that user has created on DDNS website.
 Password: The password that user has setup on DDNS website.
 Server Name: The domain name server that user has applied the domain name.
 Server Port: The port is used to connect the domain name server.
6. After enter all necessary information, click Apply button to save the settings.
7. To setup the Network 2, click Network 2 tab and follow above steps.