AVer E1008H - Manual (Page 123)

114
2.16 iPOS Setting
Set from which camera screen to display the data from the POS equipment. Click Setting, to
set the POS Console Setting.
[Note] Please using USB to RS232 converter (ex: MOXA) to connect with your POS device.
1. Click Setup tab. Click + to expand the System Setting list and select Hardware Device.
2. User should see the Hardware Device Setting dialog box is displayed.
3. In the Hardware Device Setting dialog box, click Add to set a new POS setting.
4. In the POS Mapping dialog box, fill and select the following settings. Click OK to save the
settings and Cancel to exit without saving the new setting.
 Name: Enter a name to identify the POS.
 Protocol: Select the protocol.
 Skip first: Set the number of lines you want to be removed.
 Font Color: Select the text color of the POS data.
 Port Settings:
 Local: Select the COM port which is connected and Baud Rate.

Remote: Use the TCP or UDP protocol for remote connection if POS system can
broadcast to Internet. Enter the IP address of the remote station.
 Map to Camera: Select to which camera number to display the transaction text.