AVer E1008H - Manual (Page 57)

48
2.7.1 Formatting the Hard Disk
Follow the steps below to format the hard disk for first time installation or re-format the hard
disk to the type that can be saved recording video.
1. In Storage Setting page, click Storage tab.
2. In Storage Setting page, user should see the hard disk in Detected HDD section that
NVR/DVR system has detected.
If the installed hard disk drive doesn ’t show in Free HDD list section, click Scan to
re-detect it.
3. Select the hard disk from Detected HDD section and click Format button.
4. Click Yes to confirm the format process.
5. User will see the format process bar in percentage. When the format process is done, the
percentage is displayed in 100% and click OK to complete the format process.
6. After formatting, the hard disk is ready to set as a storage path.