AVer E1008H - Manual (Page 107)

98
4. The No., Name, Description, and Priority column display the current alarm ’s information.
The Trigger Type displays the current alarm
’s trigger condition.
5. In Alarm Reset section, click the camera number to set the reset condition of alarm. Once
alarm is reset, all alarm action will stop at the moment. If the sensor normal status is high,
set the alarm reset condition to low.
- IP Camera Sensor: To adjust sensor high/low that is connected on the IP camera.
- Alarm Reset Time: Set a time for the alarm auto reset. When an alarm happen such
as motion detected and video loss, the alarm will reset at the alarm reset time.