Fe lock, Make sure the <^> ¡con in the viewfinder is on, Focus on the subject – Canon EOS D60 User Manual

Page 92: Button. (c16), Take the picture

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Built-in Flash

* FE Lock

FE (flash exposure) Lock obtains and locks the correct flash exposure reading for any part of a

subject. FE Lock is a function in the Creative zone.

CC> C >r-2i1i».1i2+O

•

I J i

• ZiC

C C "2i1ifi1i2+ O

iiL

»«*

Make sure the <^> ¡con In the

viewfinder is on.

# In the Creative zone, press the < ^ > button

to pop up the built-in flash.

Focus on the subject.

^ Focus on the subject you want to lock the

flash exposure on.

Place the center AF point over the

subject, and press the <*>

button. (C

)

The Speedlite fires a preflash and records
the required flash output for this subject in
memory.

»» The <*> icon lights in the viewfinder.

The center AF point will flash in red.

In the viewfinder, the display appears as

to®.

® Each time you press the <*> button the

preflash fires, and the FE lock is applied at

the required exposure level.

Take the picture.

® Compose the shot and take the picture.

If the subject is far enough away to cause underexposure, the <^> icon will blink

in the viewfinder. Move closer to the subject and repeat steps 2 - 4 .