Canon EOS D60 - Manual (Page 39)

a Fully Automatic Picture Taking
If the CF card becomes full, the CF Full message “FuLL CF” appears on the
LCD panel and in the viewfinder, and the camera will not take any more
pictures. Replace the CF card with another CF card that has capacity available.
When the in-focus indicator <•> is blinking, the camera will not take pictures.
(^59, 137)
im
The focus and exposure are locked when AF focusing is complete.
The camera automatically focuses on the AF point that is on the subject closest
to the camera.
The image quality can also be set. (->-50, 118)
You can set the beep that indicates the subject is in focus or the beep that
indicates the self-timer is operating to [On] or [Off]. {-*33, 118)
If the number of remaining shots [S] to (01 in the CF card is displayed, changing
the image quality will also change this remaining number of shots.
The LCD panel can be illuminated. (->67,118)
Automatic Built-in Flash
In the Basic Zone (other than and <;^>), the flash pops up automatically and fires in
low-light conditions or backlit daylight conditions. Press the flash back down when you are
finished using it.
O
If anything blocks the flash so that it cannot pop up automatically, the error code
“ E r r D5 ” (->135) appears on the LCD panel. When this occurs, set the Main
Switch to
and then set it to again.
3‘
■g_
CD
33
o'
c
—1
0
13 ’
CQ
\ I / To take pictures in an area where flash photography is prohibited or using indoor
lighting, the
(Program) (^68) mode setting is recommended.
When taking flash pictures of people at night or in dark interiors, we recommend
using “Red-eye Reduction” (->89).
AF-Assrst Beam
In dark locations, pressing the shutter button
down halfway causes the AF-assist beam
emitter to light. The AF-assist beam helps the
AF function.
The built-in AF-assist beam’s maximum range is 3.8 meters /12.5 ft.
When an EX-series external Canon Speedlite (optional) is used, the AF-assist
beam will be emitted either by the camera or external Speedlite depending on the
shooting conditions.
In the a > and <^> modes, the AF-assist lamp will not light.
39