Canon EOS D60 - Manual (Page 40)

Check the Image Immediately
You can view the images you take immediately, on the LCD monitor on the back of the camera.
Take the picture.
=> After the picture is taken, the image as it
was shot appears on the LCD monitor.
During continuous shooting, the last
captured image will be displayed.
® The image is shown for approximately 2
seconds.
You can turn the Review function on or off, as well as display the image
information display. (-^41)
You can change the length of time the image is displayed. (->-42)
You can change the brightness of the LCD monitor. (->120)
While a picture is being displayed, you can press the button to delete that
image. (^43) This will erase the image shown on the LCD monitor before it is
written to the CF card.
H Check the Image in PLAY Mode
View the image.
# Press the button.
The most recently recorded image appears.
@ Press the button again to remove the
image from the LCD monitor and exit PLAY
mode.
V,
CW OFF
V J
Change the displayed image.
® Turn the <0> dial counterclockwise to
move back through the images you have
taken, from newest to oldest.
® Turn the <0> dial clockwise to move
through the images from oldest to newest.
While the image data is being written to the CF card (access lamp blinks, ->15),
the on-screen menu will not be displayed and recorded images cannot be played
back. Pressing the
You can also view the images you have taken in index form (->-98) or enlarged form
(-99).
40