Canon EOS D60 - Manual (Page 41)

Check the Image Immediately
MENU Checking the Image After it is Taken
You can set the camera to display each image on the LCD monitor as soon as it is taken. You
can do this two ways: Select [On] to display the image by itself, or select [On (Info)] (->100) to
display the image with its recording information. Select [Off] if you do not want to display the
image. The default setting is [On].
n
Rotate
Print Order
Auto playback
Auto power off 1 min.
eview On
Review time 2 sec,
LCD Brightness Standard
№
Rotate
Print Order
Auto playback
Auto power off
eview
Review time Nn
LCD Brightness On (Info)
From the Menu, select [Review].
• Press the
press the < @> button.
Select the Review setting.
# Turn the dial to select the desired
option, then press the <@>> button.
The setting is entered, and the display
returns to the menu.
@ Press the
screen and exit the menu.
Take the picture.
«* After the picture is taken, the image as it
was shot appears on the LCD monitor.
@ The time that image is displayed depends
on the review time setting. {~^A2)
# The display differs depending on whether
you selected [On] or [On (Info)].
Cf)
3
■g_
CD
T]
o'
c
—i
CD
o'
CQ
[On] selected [On (Info)] selected (^100)
100-0010
Histogram
(^ 100 )
Image
information
(-> 100 )
Date/time
(-34)
|=| You can change the review time setting. (->42)
41