List of functions that can be used together – Canon EOS 500QD User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
List of Functions that can be Used Together
Command
dial
Autofocus
Film winding
Metering method
Built-in flash
One-shot AI Focus
Single
frame
Ccniinuous
Evaluative
metering
Center-
weighted
average
metering
Partial
metering
AulorTiBHc Manual
a
•
•
•
•
•
•
•
•
ïk
•
•
•
--
-
A
•
•
•
•
».
•
•
•
-
-
P
•
•
•
(•)•
•
Tv
•
•
•
(•)•
•
Av
•
•
•
•
M
•
•
•
(•)»
•
A>DEP
•
•
•
•
(*) Partial metering is only possible when the partial metering button is pressed
One-shot: The exposure is set at the same time as the camera focusses on the
subject. The shutter can not be reieased untii focussing is compiete.
AI Focus: When a subject taken using the One-shot autofocus continues to move,
the movement of the subject is determined and the Ai Servo autofocus auto-
maticaiiy adjusts.
AI Servo: This aiiow you to focus continuously on a moving subject. The exposure
will be set immediately before the shutter is released.
Continuous shooting: When the shutter is held down, one frame per second will be
taken continuously.
Evaluative metering: This sets a suitable exposure for shots where there is a large
difference between the light level of the subject and that of the background.
Partial metering: This ensures correct exposure of the area within the partial
metering range mark in the viewfinder.
Center-weighted average metering: This provides metering based on values of the
center of the viewfinder averaged out for the entire photograph.
55