Canon EOS 500QD - Manual (Page 49)

Shutting off the Beeper after Focussing
In certain circumstances, the electronic beeper could be undesirable,
depending on where you are taking photographs. Therefore, when taking
pictures in the creative zone, the beeper can be switched off.
1. Set the command dial to »i#.
2. Turn the electronic input dial to the
left until the film counter displays
“
0
”.
• The ■!# symbol on the display panel
will go off. When focussing, the beeper
will not sound.
• To reset the beeper to the original set­
ting, repeat the above steps and set-
the film counter to “1”.
9
3. Reset the command dial back to the
desired photographic mode.
49