Changing the film speed setting – Canon EOS 500QD User Manual

Page 48

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing the Film Speed Setting

When using non-DX coded film, or when you wish to set the film speed

(ISO number) yourself, the film speed can be selected manually in the

following way. The range of possible settings is from ISO 6-6400.

1. Set the command dial to

iso.

• The letter ISO and the film speed num

ber will appear on the display panel.

2. Turn the electronic input dial to set

the desired film speed.

3. Reset the command dial back to the

desired photographic mode.

The film speed setting will remain at the previous set value until a DX coded film is loaded

into the camera or until the film speed is reset.