Canon EOS 500QD - Manual (Page 16)

I. PREPARATIONS FOR TAKING PHOTOGRAPHS
4. Align the tip of the film with the
orange mark.
• To ensure that the film lies flat, press
lightly on the film cartridge.
• If too much film is protruding, rewind
the film cartridge slightly.
5. Ensure that the film is aligned with
the orange mark before closing the
back cover.
The film will then begin to wind for­
ward, and the number of available
frames will begin to rise. When this
has been completed, you will hear a
click like that of the shutter release,
and the film-loaded mark (@) and
the number of available frames will
appear on the LCD panel.
• If the number of available frames does
not appear, this means that the film
has not been loaded correctly. Re-load
the film correctly.
Removing the Film
After the last frame on the film has
been taken, the film will automatically
begin rewinding.
When the film has finished rewinding,
the film mark only will appear on the
LCD panel. After checking the display,
open the back cover and remove the
film.
16