Compose the photograph and take the picture – Canon EOS 500QD User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
II, TA K IN G D IF FE R E N T K IN D S O F S H O T S
4. Compose the photograph and take
the picture.
•
If you press the shutter button halfway
after taking the first frame, the 0 sym
bol will blink on the display panel to
confirm
that
multiple-exposure
photog
raphy is in progress.
•
When the pre-set number of multiple-
exposures
have
been
taken,
the
film
will automatically wind on to the next
frame
and
the
multiple-exposure
func
tion will be cancelled.
•
To cancel the multiple-exposure func
tion in the middle of shooting, reset the
number
of
remaining
frames
on
the
display as above.
When superimposing multiple exposures on a single frame, it is necessary to compensate
for the exposure value from the very beginning. Read the section on “Exposure
Compensation” on page 42.
The following table will also serve as a guideline for determining the required compensat
ing level.
Number of multiple-exposures
2
3
4
Compensation level
-1 0
-1.5
-2 0
•The compensation values given here are intended as a rough guideline. As the
required compensation values can change according to actual conditions, obtain the
required photographic data beforehand.
46