Record review, Place camera in record pause mode, Press start/stop button to resume recording – Canon E850 User Manual

Page 25: Recording starts again from where it left off

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Record Review

Press REC SEARCH (s) button during record pause mode to play back the

last segment of recorded scene (approximately three seconds) in the
viewfinder.

P A U S E

^ J

REC SEARCH

Place camera in record pause mode.

• Scene plays back in viewfinder.

• Camera returns to record pause mode after record review has ended.

Press START/STOP button to resume recording.

• Recording starts again from where it left off.

Explanation:

Record review

J' Rewinding

1
1

1 ;i)PraMth»
• REC. SEARCH

Tap*

..........

(-)bonofi

Plays back your recording in the order © to (5) (as shown left) after record

pause mode is entered The camera returns to record pause mode after

playback has ended.

R«cord pAiM n

Notes:

Skew (dislorted picture)

' Noise or skew may appear on the screen during record search mode or

record review mode. This is not a malfunction.

' Tape rewinds approximately 0.3 second for each record review, so each time

you use record review the last 0.3 second of the recorded scene is lost.
Avoid record reviewing the same section of tape over and over.

' During record review, no other operation works. However, if the OPERATE

button is pressed, the power turns off.

Record Search (Assembly Editing)/Record Review