Canon EOS 50E - Manual (Page 71)

6. Autoexposure Bracketing (AEB)
With autoexposure bracketing, the camera automatically changes the
exposure level within the set range for three successive frames. The
bracketing amount centers on the correct exposure, and the exposure can
be varied up to +2 stops in half stops. The three bracketed shots are
exposed in the following sequence: correct exposure, underexposure, and
overexposure. The film advances according to the current film advance
mode. (See “Film Advance Modes” on page 76.)
Bracketing is helpful for obtaining the desired exposure, especially with
reversal film which has a narrow exposure latitude.
Correct exposure Underexposure (-1/2) Overexposure (+1/2)
H Press the function button until the
* AEB symbol AEB appears.
Turn the Main Dial to set
desired bracketing amount.
the
The bracketing amount is dispiayed on
the LCD panei. For example, if it is set to
0 5, the bracketing sequence will be:
correct exposure, underexposure by -0.5
stop, and overexposure by +0 5 stop.
71