Shutter button operation, When it is pressed halfway, When it is pressed completely – Canon EOS 50E User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Shutter Button Operation
The EOS camera’s shutter button operates in two steps: Press it halfway
or all the way.
When it is pressed halfway:
1) The selected focusing point is activated to
focus the subject. When focus is achieved, the
focusing
point
flashes
in
red,
the
beeper
sounds, and the green in-focus indicator lights.
• There are three focusing points.
•
If the AF mode dial is set to Ai Sen/o AF
for automatic focusing point selection, the
focusing point does not flash in red and
the in-focus indicator does not light when
focus is achieved.
2) The shutter speed and aperture setting are
dispiayed
on
the
LCD
panel
and
in
the
viewfinder,
•
The exposure information will continue to
be dispiayed for four seconds after the
shutter button is released
When it is pressed completely:
The shutter is released to take the picture and
then the fiim advances.
Camera movement during the moment of exposure is called camera shake
Camera shake can cause blurred pictures.
To prevent blurred pictures due to camera shake:
• Hold the camera firmly.
• Use the pad of your fingertip to first press the shutter buttoh halfway, then
press all the way.
20