Canon EOS 50E - Manual (Page 55)

Press the shutter button halfway to
focus the subject.
• The shutter speed and aperture setting will
be displayed in the viewfinder and on the
LCD panel
IV. Creative Zone Modes
Check the shutter speed and take
the picture.
• As long as the shutter speed is not
blinking, a correct exposure will be
obtained.
If the 30” shutter speed blinks, the scene is too dark. Use a flash. In such a
case, turn the Main Dial to set a larger aperture (smaller f-number) until the
shutter speed stops blinking.
_ inn
If the 4000 shutter speed blinks, the scene is too bright In such a case, turn
the Main Dial to set a smaller aperture (larger f-number) until the shutter speed
stops blinking
Aperture setting display
The aperture can be set in halt stops. The larger the f-number, the smaller the
aperture will be. The range of aperture settings (f-numbers) displayed by the
camera differs depending on the lens used. The aperture settings that the camera
can display are listed below When no lens is attached, 00 is displayed for the
aperture setting
f.O 1 2 1 4 1.8 2 0 2.5 2 8 3 5 4 0 4 5 5,6 67 8 0 95 11 13 16 19 22
27 32 38 45 54 64 76 91
55