Canon EOS 50E - Manual (Page 35)

D Eye-Controlled Selection
Press the focusing point selector.
• The current focusing point flashes in red in
the viewfinder. The symbol for the current
focusing point is also displayed on the
LCD panel
• The focusing point selector remains
effective for 6 seconds after it is released
II. AF Modes and Metering Modes
Within 6 seconds after releasing
the focusing point selector, turn the
Main Dial until all the focusing
points and the calibration No. blink.
• To register the setting, either press the
shutter button halfway or wait 6 seconds.
• If Eye-Controlled Autofocus has been
calibrated, the calibration No. will stop
blinking and remain displayed
For proper Eye-Controlled Autofocus operation, you must first calibrate It with
your eye movement. For details, see “6 Eye-Controlled Autofocus Calibration" on
page 40 and “8 Using Eye-Controlled Autofocus” on page 46.
Although you can use Eye-Controlled Autofocus without calibrating it first, it will
not function properly.
35