Install the batteries, Attach a lens, Load the film – Canon EOS 3000 QD User Manual
Page 8: Focus the subject, Quick start guide
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Quick Start Guide
Install the batteries.
Insert two CR123A (or DL123A)
lithium batteries as shown by
the battery orientation diagram
on the battery chamber cover
See page 16
Attach a lens.
Align the red dots on the lens
and camera and turn the lens
clockwise until it snaps in place
See page 18.
Load the film.
Align the edge of the film leader
with the orange mark on the
camera and close the camera
back until it snaps shut See
page 20.
• The film will then advance to
the first frame automatically.
Focus the subject.
Aim the AF frame on the
subject and press the shutter
button halfway to autofocus.
See page 24.
• If the < i> icon blinks, pop up
the built-in flash See page
54