Lithium batteries, Low battery power, Lens – Canon EOS 3000 QD User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Handling Precautions
Lithium Batteries
(1) The camera operates on two CR123A (or DL123A) lithium batteries.
Check the battery level in the following cases:
• After replacing the batteries.
• After not using the camera for an extended period.
• The shutter stops working.
• The camera is being used in a low-temperature environment.
• You will be shooting an important event.
(2) Before installing the batteries, wipe the battery contacts to remove any
fingerprints and smudges. This is to prevent faulty connections and
corrosion.
(3) Although the batteries work well even at low temperatures, battery
performance may decline slightly at freezing temperatures. In such a
case, keep spare batteries warm in a pocket, etc., and use and warm
the batteries alternately.
Low Battery Power
When the be icon blinks on the LCD panel, a picture can still be taken at
the proper exposure. However, there may not be enough battery power to
advance and rewind the film automatically. Replace with new batteries.
Lens
After detaching the lens from the camera,
put on the lens caps or put down the lens
with the rear end up to avoid scratching
the lens surface and electrical contacts.
electrical contacts