Bulb exposures, Turn the command dial to Page 50
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bulb Exposures
'■J. HTItJ
When bulb is set, you can expose the film for as long as you press the
shutter button completely. Bulb exposures are useful when long exposures
are required for night scenes, fireworks, etc. In this case, Remote Switch
RS-60E3 (sold separately) is convenient since it frees you from holding
down the shutter button during bulb exposures.
i
Turn the Command Dial to
f
buib
0 n
u.u
I
U U L U
IO I Turn the < ¿Si > until buLb is displayed for the shutter speed. • buLb follows 30”. Press and hold down the the desired aperture. Frame the shot, then press and completely for the duration of the • The shutter remains open while the shutter button is pressed completely. • During bulb exposures, buLb blinks on the LCD panel. • With a new set of batteries, a bulb exposure can be as long as about 6 hours at room temperature. • A bulb exposure can be combined with multiple exposures (see page 51). 50
button and turn the < ¿Ss > to set
hold down the shutter button
exposure.