Checking the battery level, Turn the command dial to any setting except Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the Batteries and Checking the Battery Level
Checking the Battery Level
Check the battery level after replacing the batteries and before using the
camera.
Turn the Command Dial to any
setting except .
• The camera \«ill then turn on and the
LCD panel will display one of the
following battery level Icons:
1
mm
da
dZI
b e
—
Battery level icon
Battery Service Life (With 24-ex. rolls)
Battery level OK.
The battery level Is low. Keep
spare batteries handy.
Battery exhaustion is
imminent.
Replace the batteries. (See
page 7.) In this case, the
shutter button will not function.
Ambient Temperature
0% Flash Use
50% Flash Use
100% Flash Use
At 20 °C
60 rolls
25 rolls
12 rolls
At-10°C
35 rolls
15 rolls
7 rolls
' The Battery Service Life table above is based on Canon’s testing
conditions using an EF 35-80mm f/4-5.6 lens and new batteries.
' Operating the camera without film will still consume battery power. It will
reduce the number of rolls that can be taken with the batteries.
u
If nothing is displayed on the LCD panel, the batteries may have been
installed incorrectly. Take out the batteries and install correctly (See page 16).
^ For places where CR123A (or DL123A) batteries may not be easily available,
take spare batteries with you. Also carry spare batteries for extended
shooting sessions.
17