Troubleshooting, Troubleshooting -86 – Nikon E2 - E2S User Manual
Page 85
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Troubleshooting
If your camera detects a defect or malfunction, a warning indicator
appears or blinks in the viewfinder and/or in the LCD panel to alert
you. Refer to the troubleshooting charts provided below and follow the
suggestion for correcting the problem before bringing your camera to
a Nikon Service Center for repair.
Warnina indication
Check this
Ref,
page
LCD
panel
Viewfinder
Cause
Remedy
□
blinks
1 --1
blinks
Camera back Is open
or camera back is
closed with no Image
Memory Card inside.
Insert a Nikon
approved Image
Memory Card. Close
the camera back.
P. 24
P. 82
blinks
A write-protected
Image Memory Card
is inserted.
Cancel write-
protection.
P. 82
blinks
( C d )
An uninitialized
Image Memory Card
is inserted.
Initialize the Image
Memory Card as
instructed in this
instruction manual.
P. 25
jCH*NO^
blinks
blinks
An Image Memory
Card not specified by
Nikon in the
instruction manual is
inserted.
Insert a Nikon
approved Image
Memory Card.
P. 82
n
u
blinks
No frames remain.
Insert a new Image
Memory Card.
P. 24
BODY
blinks
Display
Camera's NiCd
battery is weak.
Recharge the NiCd
battery.
P.83
da
blinks
CARD
blinks
segment
blinks
Battery power for
SRAM is weak.
Replace the battery
according to the
instruction.
—
CLOCK
blinks
Normal
display
Lithium battery for
clock is weak.
Replace the lithium
battery at a Nikon
Service Center.
—
85