Using exposure compensation, To cancel exposure compensation, Set the exposure compensation value – Nikon E2 - E2S User Manual

Page 58: Exposure compensation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Exposure compensation

Using Exposure Compensation

Set the metering system

We recommend using Center-Weighted or

Spot Metering.

To cancel exposure compensation

Set the compensation value to 0.0.

Set the exposure compensation

value.

Rotate the command dial while pressing the

exposure compensation button.

—You can compensate exposure within a

range of +2.0 EV to -2.0 EV (in 1/4 EV

increments.)

—Rotate the command dial to increase the

value (-) when the background is dark,

and decrease the value (+) when the

background is bright.

Remove your finger from the

i exposure compensation button.

When the compensation is set, the exposure

compensation mark appears in the
viewfinder and the LCD panel.

—Press the exposure compensation button

to confirm the value set and the
compensation value will appear in the

LCD panel.

Check the focus indicator and fully

' depress the shutter release button.