Nikon E2 - E2S - Manual (Page 34)

Setting the frame advance mode
The Main dial turns the power ON and OFF, and selects
shooting, data transfer and playback modes.
While pressing the Main dial lock­
release button, rotate the Main dial to
the desired mode.
—Make sure that the Main dial clicks into
position.
L: Camera power is OFF.
Set the Main dial to L when the camera is not in use to preserve
battery power and prevent accidental release of the shutter.
S: Single-frame shooting mode
Shooting operation is limited to one frame at a time.
C: Continuous shooting mode
Shooting operation continues as long as the shutter release button
is depressed.
Model Shooting speed Max. number of frames
E2 1 frame/sec.*'
—
E2s Approx. 3 frames/ sec.*^ 7 frames/sec.*^
*1 A shutter speed faster than 1/250 sec. is selected and image quality is
set to BASIC (when using Image Memory Card EC-15).
*2 A shutter speed faster than 1/250 sec. is selected.
*3 One shooting operation comprises a maximum of 7 frames. An interval of
approx. 7 seconds is required before proceeding to the next shooting
operation (when using Image Memory Card EC-15).
SD: Digital output mode.
The shutter can be released but no image will be recorded on the Image
Memory Card.
PB: Playback mode
Image data stored in the memory card can be played back on a
TV monitor.
34