Selecting programmed auto mode, Set the focus mode to s, Set the frame advance mode to s – Nikon E2 - E2S User Manual

Page 27: Set the exposure mode to p, Set the metering system to k, Setting the frame advance mode, Setting the focus mode -44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Selecting Programmed Auto mode

Programmed Auto is ideal for quick operation and is the

simplest method for exposure control. Use this mode for most
general photographic situations.

Set the focus mode to S.

Rotate the focus mode selector to S (Single

Servo Autofocus).

—See page 42 for details on focus modes.

Set the frame advance mode to S.

While pressing the Main dial lock-release

button, rotate the Main dial to S (Single

frame shooting),
—See page 34 for details on the frame

advance mode.

Set the exposure mode to P.

Keeping the MODE button pressed, rotate

the command dial to set the exposure mode

to P (Programmed Auto) mode.

—See page 35 for details on the exposure

mode.

Set the metering system to K.

While pressing the metering system button,

rotate the command dial to set the metering

system to Matrix Metering E*3.

—See page 36 for details on metering

systems.