Nikon E2 - E2S - Manual (Page 20)

Mounting and removing the iens
Only the Nikkor lenses which are listed In the usability chart can
be used with the E2/E2s. (See pages 75-76.)
—Be sure to set the Main dial to L. (See page 34.)
—Be careful not to touch, smear or damage the CPU contacts as this may
cause the camera to malfunction. If this occurs, clean the contacts with a
soft, clean, dry cloth.
1
Removing the body cap
Rotate the body cap clockwise to remove.
2
Mounting the lens
Mount the lens by aligning the
distance/aperture index line on the lens with
the lens mounting index on the camera.
Rotate the lens counter-clockwise until it
locks into place.
—Do not press the lens release button when
mounting the lens.
Removing the lens
Depress and hold the lens release button;
securely grip the lens and rotate it
clockwise, in the direction of the arrow.
When leaving the camera without a lens
Attach the body cap to the camera body; align the indexes on both the cap
and the body, and rotate the cap counter-clockwise as far as it will go.
If the lens release button remains stuck in the pressed position
Make sure you rotate the lens until the lens release button returns back to
the normal position with a click.
20