Location and function of controls (continued), U access card slot, 2] satellite in jack – Sony SAT-A50 User Manual
Page 70: M ch3/ch4 switch, G] vhf/uhf in jack, U ac in jack, 6] tel line jack, 7] vhf(sat)/uhf out jack, 8] a/v output jacks, 9] low speed data
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Location and Function of Controls (continued)
SAT-B50 Back Panel
[U ACCESS CARD slot
Do not remove the Access Card unless instructed
to do so by your service provider.
[2] SATELLITE IN jack
Inputs satellite signals from your Satellite Dish
Antenna using RG-6 coaxial cable.
m CH3/CH4 switch
When you use an RF connection (VHF(SAT)/
UFIF OUT jack), this setting determines the TV
channel on which programs from the Digital
Satellite Receiver can be viewed.
g] VHF/UHF IN jack
Inputs off-air signals from your local TV off-air
antenna using coaxial cable. Some antennas
require an adapter (not supplied).
[U AC IN jack
Inputs AC power from a power outlet using the
AC Power Cable.
[6] TEL LINE jack
Connects the Digital Satellite Receiver to a
telephone outlet using a telephone line cable.
[7] VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF /
UHF input on your TV or VCR using coaxial
cable.
[8] A/V OUTPUT jacks
Output audio and video signals to your TV and
other audio/video equipment using A/V cables.
[9] LOW SPEED DATA
For future application.
US VCR CONTROL jack
Allows the IR Blaster to control a VCR and/or
cable box. Also allows connection of a monaural
cable for use with Sony SmartFile VCRs.
70