Highlight and select "rf, Highlight and select "return, 2 highlight and select "rf security code – Sony SAT-A50 User Manual
Page 32: 0 (d d) © (d (6), Setting the security code
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up Your Digital Satellite Receiver (SYSTEM)
(continued)
Highlight and select "RF".
The Remote Signal pop-up closes to show the Remote Control
display.
_____
Highlight and select "Return".
The display closes to show the Main Menu, and the Digital
Satellite Receiver is set to receive RF signals from the remote
control.
0 (D d)
© (D (6)
© (
8
) ©
© o
Setting the Security Code
If the Digital Satellite Receiver is receiving signals from another RF
remote control in your home (or from your neighbor's home), you can
eliminate this problem by changing the security codes for the Digital
Satellite Receiver and remote control, or by selecting IR control.
Both the Digital Satellite Receiver and the remote control must use the
same three digit security code.
1
Select "Remote Control" from the SYSTEM
pop-up (see page 31).
The Remote Control display appears.
2 Highlight and select "RF Security Code'
The confirmation pop-up appears.
32