T] access card slot, 7] tel line jack, El low speed data – Sony SAT-A50 User Manual
Page 69: Si-digital out (optical), Sat-a50 back panel
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SAT-A50 Back Panel
[T] ACCESS CARD slot
Do not remove the Access Card unless instructed
to do so by your service provider.
[2] SATELLITE IN jack
Inputs satellite signals from your Satellite Dish
Anterma using RG-6 coaxial cable.
[3] RF REMOTE Jack
Inputs remote control signals using the RF
Anterma.
[
4
] CH3/CH4 switch
When you use an RF connection (VHF(SAT)/
UHF OUT jack), this setting determines the TV
channel on which programs from the Digital
Satellite Receiver can be viewed.
[5] VHF/UHFIN jack
Inputs off-air signals from your local TV off-air
antenna using coaxial cable. Some antennas
require an adapter (not supplied).
[6] AC IN jack
Inputs AC power from a power outlet using the
AC Power Cable.
[7] TEL LINE jack
Cormects the Digital Satellite Receiver to a
telephone outlet using a telephone line cable.
[8] VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF/
UFIF input on your TV or VCR using coaxial
cable.
[9] A/V OUTPUT jacks
Output audio and video signals to your TV and
other audio/video equipment using A/V cables.
El LOW SPEED DATA
For future application.
M
VCR CONTROL jack
Allows the IR Blaster to control a VCR and/or
cable box. Also allows connection of a monaural
cable for use with Sony SmartFile VCRs.
SI-DIGITAL OUT (OPTICAL)
Outputs digital audio signals to the digital
optical input of your audio receiver.
69