Setting the vcr manufacturer code – Sony SAT-A50 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up Your Digital Satellite Receiver (SYSTEM)
(continued)
V Tips
•
If you connected a Sony SmartFile
VCR, use the manufacturer code of
99.
• Do not stop or interrupt the VCR
test by pressing any buttons until
after the VCR test is complete.
Setting the VCR Manufacturer Code
The VCR Manufacturer Code allows the Digital Satellite
Receiver to control your VCR using the IR Blaster or a Sony
SmartFile VCR.
1
Highlight and select "Manufacturer" from the VCR
Control display (see page 25).
The Manufacturer pop-up appears.
__________
2
Highlight and select the manufacturer of your VCR.
The manufacturer's pop-up appears.
3
Select a VCR manufacturer code from the list.
The Test pop-up appears.
Some manufacturers have more than one code to choose from.
If the VCR manufacturer code you select does not work in step 4
below you can select another code for that manufacturer.
4
Select "Yes" to perform a VCR test.
If you select "Yes", a pop-up appears giving you instructions on
how to perform a VCR test.
If the test is unsuccessful, check your connections and the IR
Blaster placement, then repeat this procedure selecting a
different VCR manufacturer code in step 3 (if your VCR
manufacturer has more than one code).
26