Sony SAT-A50 - Manual (Page 10)

step 4: Adding a VCR and Audio System
You can record programs by adding a VCR. You can also connect your
Digital Satellite Receiver to an audio system for enhanced sound
enjoyment.
^ If you have a digital
or Dolby* Digital
audio system
(SAT-A50 only)
Connect the DIGITAL
OUT (OPTICAL) of the
Digital Satellite
Receiver to the optical
digital input of your
audio system.
'7 Tip
If you connect your
Digital Satellite Receiver
to a Dolby Digital
receiver, set the Dolby
Digital option of the
Audio menu to Auto
Select. See "Setting
Audio Ophons
(AUDIO)" on page 64
for more information.
Audio Receiver
Optical Cable
(SAT-A50 only)
(optional Sony
accessory POC-15A)
® If you have a stereo
or Dolby Pro Logic*
audio system
Connect the upper
AUDIO R and
L(mono) jacks on the
Digital Satellite
Receiver to the audio
inputs of your stereo
amplifier.
If your TV and VCR have A/V
jacks
Cormect the VIDEO OUT jacks of
your Digital Satellite Receiver to
the A/V input jacks of your VCR
using the supplied A/V cable.
Then, connect the A/V output
jacks of your VCR to the A/V
input jacks of your TV using an
A/V cable. (Be sure to match the
colors on the jacks with the
colored plugs on the A/V cable.)
^ If your TV and VCR have S-Video
jacks
Use the S-Video cable instead of
the yellow video connection.
Tip
To allow your Digital Satellite
Receiver to control the recording
functions of your VCR, See "Step 5:
Connecting the IR Blaster" on page
11
.
If your TV and VCR
do not have
A/V jacks
Connect the
VHF(SAT)/UHF OUT
jack on the Digital
Satellite Receiver to
the VHF/UHF input
jack on your VCR
using coaxial cable.
Then, connect the
VHF/UHF output
jack on your VCR to
the VHF/UHF input
jack on your TV using
coaxial cable.
Set the CH3/CH4
switch to the channel
that does not carry
off-air broadcasts in
your area.
Note
With this connection
your, input source is
channel 3 or channel 4
depending on how you
set the CH3/CH4
switch on your VCR.
10