Sony PLM-S700 User Manual
K glasstron, Glasstron, Plm-s700
Table of contents
Document Outline
- Glasstron
- WARNING
- AVERTISSEMENT
- WARNING
- visuaf^isplay
- conraptin^
- WARNING
- WARNING
- SAFETY INSTRUCTIONS
- USE RESTRICTIONS
- Health Concerns
- Health Concerns
- Caution: Motion Sickness from External Mot! i.
- Caution: Accidents.
- Caution: Sound Volume.
- Warning: Proper Fit.
- Warning: No Use by Children Age 15 or Younger.
- Caution: Electric Shock.
- Caution: Do Not Disassemble.
- Caution: Avoid Wet, Humid, Dusty and Smoky Environments.
- Caution: Avoid High Temperature or Direct Sunlight/Avoid Mechanical Shock.
- Caution: Unplug the Product When Not in Use.
- About the Glasstron
- Checking the supplied accessories
- Locating the parts and controls
- Connecting the Glasstron
- Wearing the Glasstron
- Turning on the Glasstron
- Checking the display unit position
- Turn on the Glasstron sliding the POWER switch.
- Turn the PUSH DISPLAY jog dial to select the desired language, then press the jog dial.
- Read the WARNING and press the jog dial.
- Read the next WARNING and press the jog dial.
- Adjust the display unit so that you can see an asterisk (*) in each of the four corners as shown below.
- After you complete the display unit adjustment, press the jog dial.
- Read the next WARNING, then go to "Checking the screen position alignment."
- Checking the screen position alignment
- Checking the display unit position
- Setting the password
- Using the Glasstron
- Turn on the Glasstron using the POWER switch, then press PUSH DISPLAY jog dial.
- Turn the PUSH DISPLAY jog dial to enter the first number of your password, then press the jog dial. Enter the second and third numbers in the same way.
- Follow the instructions on the screen.
- Select the input signal using the PC-VIDEO switch.
- Input the signal fron) the connected equipment.
- Adjust the brightness by turning the BRIGHT contr
- Adjust the sound volume by turning the VOL control.
- After you finish using the Glasstron
- Screen warnings against overuse of the Giasstron
- Viewing the surrounding environment
- Turn the SEE-THROUGH dial.
- Set the SCREEN switch to ON.
- Adjusting the sound/picture
- Adjusting the RGB signal
- Adjusting the video signal CONTRAST
- COLOR
- Resetting the adjustment to t^e factory preset I*“ /el
- HUE
- Using the optional battery pack
- Precautions
- Error messages
- Specifications
- Index