Connecting the power source, Cormecting the power source, Connecting the glasstron (continued) – Sony PLM-S700 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Glasstron (continued)
Notes
• Even if you use the supplied audio/video
cable, the audio and video signals may not be
carried to the Glasstron depending on the
video source. In this case, contact your Sony
dealer or local authorized Sony service
facilitv.
' When you connect the Glasstron to the audio
output (phono lacks) of -our video
equipment, connect the Glas^iton to both the
right and left audio output i: r;s. If you
cormect the Glasstron to just < ne audio
output jack, you will hear sound from only
one of the stereo earphones.
Connecting the power source
Connect the AC power adapter AC-PLM3 (supplied) to the DC IN connector on the power
supply box. Then, cormect the AC power cord (supplied) to the AC power adapter and to a wall
outlet. Do not connect the power source until all other cormections are complete.
to
wall outlet
AC power adapter
AC-PLM3 (supplied)
AC power cord (supplied)
Power supply box
20
-us