Sony PLM-S700 - Manual (Page 39)

Adjusting the RGB signal
It is recommended to adjust the picture after installing the information file included in the
supplied Windows 95/Windows 98 PC Glasstron Information disk, or the screen adjustment
disk for Macintosh. For details on how to install the information file, refer to the instruction
manual "Windows 95/Windows 98 PC Glasstron Information Disk/screen adjustment disk for
Macintosh".
Note
When you display the picture on both the LCD display of the notebook PC and on the Glasstron, you
cannot adjust the picture on the Glasstron because of the mismatch of the output signal frequencies
with some notebook PCs. In this case, change the display mode on your PC to the external monitor
only. Then, change the screen resolution according to the list on "Signal compatibility" (page 35).
VCENT
Turn the jog dial to adjust
the center of the picture,
then press the jog dial.
TRACKING
Turn the jog dial until the
stripes on the picture
disappear, then press the
jog dial.
TRACKING a
tfl /UXJ •»<] EXEC
HCENT
Turn the jog dial to adjust
the center of the picture,
then press the jog dial.
H CENT ^ ^ I
I
Cd ADJ EXEC i
SYNC
Turn the jog dial to adju
the clearance of the pict
then press the jog dial.
continue