Sony PLM-S700 - Manual (Page 17)

Connecting a Macintosh (desktop models)
Depending on the model, you may need to use the supplied Macintosh adapter to connect the
RGB signal cabl? (supplied) as shown below. When you cormect the Glasstron to your
Macintosh, set the PC-VIDEO switch on the power supply box to "PC."
to monitor port
of Macintosh
(D-Sub 15-pin,
male)
to monitor
port
to RGB signal cable
VGA type connector
(HD15, female)
Set the PC-VIDEO switch
to "PC."
Power supply box
to monitor port
Macintosh
adapter
to audio port
PC RGB
AUDIO
to PC AUDIO
connector to RGB connector
Audio cable (supplied)
—r—----------------
RGB signal cable (supplied)
.; Signal flow
Notes on connection
• The supplied display adapter does not support the models before the Macintosh II series.
• Set the display setting to the 16-inch display mode (832 x 624) or the 13-inch display mode (640 x
480). The Glasstron does not display the image with the 19-inch display mode (1024 x 768) or more.
continued