Connecting the video equipment, Cormecting the video equipment, Connecting the glasstron (continued) – Sony PLM-S700 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

K.)- .

Connecting the Glasstron (continued)

Connecting the video equipment

Connect a VCR, laser disc player, DVD player, or camcorder to the power sup- / box using one

of the audio/vicjeo cables (supplied) as shown below. When you connect the ’ .^sstron to the
video equipment, set the PC-'^DEO switch on the power supply box to "VIE

Note

Do not use the audio, audio/video or S-video connecting cables, which are 9.8 fc (3m) or longer. The
performance mav be reduced.

VCR, laser disc player, DVD player,
camcorder, etc.

Set the PC-VIDEO switch

to "VIDEO."

AUDIO/VIDEO'S,

to AUDIO/VIDEO connector

Audio/video cable (supplied)

(specidl miniplug

■ *—*

phono plug)

to audio/video output

^ ■

isa-'

to audio/video outputs

Video (yellow)

Audio L (white)

Audio R (red)

: Signal flow

Audio/video cable (supplied)
(special miniplug

*—*■

special miniplug)

Camcorder, etc.

-us