Sony PLM-S700 - Manual (Page 53)

English
The "Windows 95/Windows 98 PC Glasstron Information Disk" includes the information file on choosing the
correct screen resolurions. When you use Microsoft Windows 95 or Windows 98, you must match the screen
resolution of the Glasstron to the output signal of your computer for optimal Glasstron performance. In order
for the Glasstron to receive the output signal from the computer correctly, and to set up the functions of the
Glasstron, install the files from the disk onto the hard disk of your computer using Windows 95 or Windows
98.
• Microsoft, MS, MS-EXZ)S and Windows* are registered trademarks of Microsoft Corporation in the United States and other
countries.
• All other product names menhoned herein may be the trademarks or registered trademarks of their respective companies.
Furthermore, "™" and
"®"
are not mentioned in each case in this manual.
Installing the "Windows 95/Windows 98 PC Glasstron Information Disk"
1 Start Windows 95 or Windows 98.
2 Click [Start], then point to [Settings] and click [Control Panel].
3 Doubleclick the [Display] icon.
For Windows 95
4 Click the [Setting] tab, then click the [Change Display] button.
5 Click the [Change...] button.
Or
4 Click the [Settings] tab, then click the [Advanced Properties] button.
5 Click the [Monitor] tab on the [Advanced Display Properties] dialog box, then click the [Change (Monitor
Type)] button.
6 Click the [Have Disk...] button on the [Select Device] dialog box.
7 Insert the "Windows 95/Windows 98 PC Glasstron Information Disk" into the floppy disk drive.
8 Type the drive name of the inserted "Windows 95/Windows 98 PC Glasstron Information Disk" (Default:
a:\) in the [Copy manufacture’s files from] box in the [Install From Disk] dialog box, and click the [OK]
button.
9 Select the display model you use in the [Models:] box.
10 Restart your computer to apply the new setting.
For Windows 98
4 Click the [Settings] tab, then click the [Advanced Properties] button.
5 Click the [Monitor] tab, then click the [Change] button.
6 Click the [Next] button.
7 Click the radio button beside [Display a list of all the drives in a specific location, so you can select the drive
you want], then click the [Next] button.
8 Click the [Have Disk] button.
9 Insert the "Windows 95/Windows 98 PC Glasstron Information Disk" into the floppy disk drive. Тзфе the
drive name of the inserted "Windows 95/Windows 98 PC Glasstron Information Disk" (Default: a:\) in the
[Copy manufacture's files from] box in the [Install From Disk] dialog box, and click the [OK] button.
10 CUck the [Next] button and check the message, then click the [Next] button again.
11 Click the [Finish] button.
12 Click the [Apply] button, then click the [OK] button.
13 Restart your computer to apply the new setting.