Turning on the glasstron, Checking the display unit position, Turn on the glasstron sliding the power switch – Sony PLM-S700 User Manual
Page 23: Read the warning and press the jog dial, Checking the display unit position q
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Turning on the Glasstron
After you complete all of the connections and put on the Glasstron properly, turn on both the
Glasstron and the connected equipment, and follow the procedures below.
® Checking the display unit position —► This page
(D
Checking the screen position ahgnment —*■ Page 25
(D
Setting a password
—*
Page 28
If you do not want to use a password, you have to set the Glasstron to operate without
using a password in "Setting the password."
Checking the display unit position
Every time you turn on the Glasstron, the adjustment screen appears to help you adjust the
display unit properly. Adjust the display unit following the procedure below.
Turn on the Glasstron sliding the POWER switch.
The POWER/POWER SAVING lamp
lights up green.
Screen
JL
POWER/POWER SAVING
DISPLAY LANGUAGE
FRANQ^
ON/OFF-^
CdSEL «dEXEC
Turn the PUSH DISPLAY jog dial to select the desired language,
then press the jog dial.
DISPLAY LANGUAGE
FR^^iis
:d SEL -d EXEC
Read the WARNING and press the jog dial.
WARNING
FOR YOUR SAFETY AND TO
PREVENT EYE OR OTHER
INJURY, READ AND FOLLOW
ALL INSTRUCTIONS IN THE
USER'S MANUAL.
*dCHECK
continued