Checking the screen position alignment, Warning, Press the push display jog dial – Sony PLM-S700 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Read the next WARNING, then go to "Checking the screen position
alignment."
WARNING
TO PREVENT EYE DAMAGE,
DO NOT USE THIS PRODUCT
IF THE VERTICAL LINES
DO NOT CROSS THE
HORIZONTAL LINE ON THE
NEXT SCREEN.
SEETHE USER'S MANUAL
FOR DETAILS.
'<1 CHECK
Checking the screen position alignment
WARNING
Each time this product is used, adjustment screens will appear, requiring the viewer to
properly fit the product. Proper fit means that an asterisk (*) will appear in each comer of the
display. To prevent eye damage, do not use this product if the vertical lines do not cross the
horizontal line on the next screen.
The Glasstron includes two small (left and right) LCDs. You are watching a combined picture
created from these two screens. Although the screen position is properly aligned at the factory,
it may become misaligned if the Glasstron is deformed or damaged. Check the screen position
alignment every time you turn on the Glasstron. If you cannot have correct screen alignment,
stop using the Glasstron immediately.
Press the PUSH DISPLAY jog dial.
Screen
continued
25-‘
r