If your video equipment has an s-video jack – Sony PLM-S700 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
iSafilSSfW”
If your video equipment has an S-video jack
Connect the Glasstron to the video equipment using the supplied S-video cable and the audio/
video cable to enjoy the highest quality pictures. In this case, you do not need to connect the video
(yeUow) plug. If yoitconnect both the S-video and video plugs, the S-video signal is automatically
selected. When you connect the Glasstron to the video equipment, set the PC-VIDEO switch on the
power supply box to "VIDEO."
Set the PC-VIDEO switch
to "VIDEO."
VCR, Laser disc player, DVD player,
camcorder, etc.
to AUDIO/VIDEO connector
to audio/video output
Audio/video cable (supplied)
(special miniplug
*—*■
special
miniplug)
Audio/video cable (supplied)
(special miniplug
*—*■
phono
plug)
]: Signal flow
Audio R (red)
to audio/video outputs
About the AUDIO/VIDEO input jack
The AUDIO/VIDEO input jack of the
Glasstron is a special minijack, and the signal
cormections are aligned as shown on the right.
This alignment may differ depending on the
equipment.