Viewing the surrounding environment, Turn the see-through dial, Set the screen switch to on – Sony PLM-S700 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Viewing the surrounding environment

While you are wearing the Glasstron, you can view the surrounding en\ ^nment through the
screen in two w^avs;

Viewing the'surrounding

environment by adjusting the

transparency of the entire

screen (See-through mode)

You can adjust the level of transparency of

the entire screen with the LCD shutter dial.

¡1

•*;

The picture becomes

transparent.

The area surrounding
the picture also becomes
transparent.

Turn the SEE-THROUGH dial.

i ^

SEE

CLOl

■ -THRO

SE----

UGH
)PEN

Note

If there is a bright light near the display unit,
you may not be able to completely black out
the surrormding environment bv adjusting the
SEE-THROUGH dial.

Viewing the i rrounding

environment i the area

around the ^ cture only

(Screen mo a)

You can adjust :• level of transparency of

the screen area around the picture only. The
picture remains intact.

The picture remains

intact.

The area surrounding

the picture also becomes
transparent

Set the SCREEN switch to
ON.

In this mode, the screen does not
become transparent even if you turn
the SEE-THROUGH dial.

Notes

• When you set the SCREEN switch to ON, the

edges of the picture may fade a bit, but this is
not a malhmction.

• If there is a bright light near the display unit,

you may not be able to completely black out
the surrormding environment arround the

picture by adjusting the SEE-THROUGH dial
when you set the SCREEN switch to on.

-us