Preparation for playback – Sony CCD-F33 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation for Playback
N-1
When a VCR has been connected to the TV. refer
to the pages 36,37 and 38.
3CH/4CH
channel
selector
ANTENNA
N-2
VMC-910MS/
920MS
AUDIO/VIDEO
IN
Connecting a TV without audio video
input jacks f?BI
1 Connect the RFU adaptor to this unit.
2 Connect the VHF antenna, this unit and TV to
the antenna selector (supplied with the
RFU-90UC).
Use a 75-ohm coaxial cable for antenna
connection.
On the TV channel for the video camera
recorder
Whenever you view the playback picture, set the
channel selector of the RFU adaptor to either
VHF channel 3 CH or 4 CH and select the same
channel on the TV.
Connecting a TV (or color monitor) with
audio video input jacks iMM
Connect this unit to the TV using the
commercially available audio/video cable (like
Sony VMC-910MS/920MS for stereo
equipment).
Set the TVA/IDEO selector button on the TV
as follows:
For viewing a playback picture -> VIDEO
For viewing TV programs
- *
TV
32