Samsung AQ 1O0 - Manual (Page 88)

PictBridae : Reset
Resets user-changed configurations.
1. Use the Up / Down button to select
the [Reset] menu tab, and then press
the Right button.
2. Use the Up / Down button to select
[Yes] or [No], and then press the OK
button.
If [Yes] is selected : All print and image settings are reset.
If [No] is selected : Settings are not reset.
Default print settings vary depending on the printer manufacturer.
For your printer’s default settings, refer to the user’s guide that
came with your printer.
Important notes
■
Be sure to observe the following precautions!
• This unit contains precision electronic components. Do not use or
store this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
• Do not leave this camera in places subject to dust, chemicals (like
naphthalene and mothballs), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when
not planning to use the camera for a long period of time
• Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches,
coastal dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the
camera unusable.
• Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD screen from an impact. When this
camera is not used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.