Samsung AQ 1O0 - Manual (Page 79)

starting the Multi Slide Show ( Q) )
Selecting Images
w. You can select images to view in a slide show.
1. Use the Up / Down button to select the
[Images] menu, and then press the
Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
[All] : All images saved on the
Memory are played back. Press the OK button to
save the configuration.
[Date] : Images taken on a specified date are played back.
Press the OK button to save the configuration.
[Select]: To play groups of selected images. [Select] lets you
collect images into separate groups labeled [Select!],
[Select2], or [Selects], When you play a slide show,
you select the group you want to play.
0 To collect images into a group, follow these steps:
1. In the Multi Slide Show menu, use the Up / Down button to
select Images, and then press the OK button.
2. Use the Up / Down button to select [Select], and then press
the OK button. The Select window appears.
3. Press the Up / Down button to select [New Select] (if neces­
sary), and then press the OK button. The camera displays
Processing, and then displays image thumbnails.
4. Press the Up / Down / Up / Down button to highlight an im­
age. Press the OK button to select the image. A check mark
appears on the image. (The images will appear in the order
you select them.)
5. Repeat Step 4 for each image you want to included. Press
__ the Fn button when done.
To play a slide show of a group of selected images, follow these
steps:
1. On the Multi Slide Show menu, use the Up / Down button to
select [Images], and then press the OK button.
2. Use the Up /Down button to select [Select] (or Select 1, 2, or 3,
depending on what your camera is displaying), and then press
the OK button. The Select window appears.
3. On the Select window, use the Up / Down button to select
the group you want to play, [Select 1, 2, or 3]. The thumbnail
screen for that group appears.
4. Press the Fn button. You are returned to the Main menu.
5. Select [Multi Slide Show] again, and then press the OK button.
6. Select [Start], and then press the OK button.
7. Select [Play] for single cycle play or [Repeat] for continuous,
repetitive play, and then press the OK button. The slide show
begins.
Notes:
- When you save the first group, it is saved as [Select!]. When
you save a second group, that group is saved as [Select!]
and the previous group is saved as [Select2], When you save
a third group, that group is saved as [Select!], the previous
[Select!] group is saved as [Select2], and the previous [Select2]
group is saved as [Selects], If you save a fourth group, the
fourth group supplants the previous [Select!], the previous
[Select!] group supplants the [Select2] group, and the [Select2]
group supplants the [Selects],